WHAT DO I NEED TO KNOW ?

  1. Allowable pressure drop for the silencer.

  2. Flow Rate in ACFM

  3. Flow temperature

  4. Flow media mole weight (M.W.)

  5. Connection size

  6. Silencer (PDF) Pressure Drop Factor

 

WHAT DO I DO ?

  1. Calculate sq. foot area based on recommended velocity limit, Formula 1.

  2. Select nozzle size in inches based on square feet required, see nozzle area chart.

  3. Calculate actual flow velocity in FPM, Formula 2.

  4. Calculate actual pressure drop, Formula 3.

  5. Optimize pressure drop and size selection.

 

Disclaimer:

 

No Warranty Expressed or Implied


All technical, performance, and dimensional data presented in this web site is intended to be "typical," and may be revised at any time without prior notice.

 

All information provided is intended to assist users and engineers who specify, design, and install Industrial Silencers. 

While this information is provided in good faith, and believed to be accurate,


VANEC does not guarantee satisfactory results from reliance on this information. 

 

Nothing contained in this web site is to be construed as a warranty or guaranty; expressed or implied.

Made In U.S.A.

 


 

Made In

USA


Home About Accessories Catalog Demo Gallery Pipe Chart Representatives Site Map Technical Warranty

 

Copyright © 2009 Vibration And Noise Engineering Corporation   -  All rights Reserved.      Charlie

Rev:09/03/2009