The VANEC Model 267 Intake Filter
is designed to be used on turbocharged engines, gas turbine intakes and other similar
types of air breathing equipment.
The Model 267 Intake Filter, when properly applied, will remove 92% of all dust
impinging on the element. The high dirt holding capacity of the filter allows it to hold
up to 290 grams of dust per panel before reaching the maximum recommended pressure drop.
Pressure drop for the VANEC Model 267 will be 1 1/2 to 2 in.
H2O when they are clean and as the filter elements become loaded with dust, the
pressure drop will gradually increase to 3 in. H2O. At this time, the filter
elements should be replaced.
For filtering with an integral silencer, see the VANEC
Model 261 Intake Filter Quieter.
This series is designed to be mounted vertically.
For a greater degree of filtering or noise control contact VANEC
for recommended enhancements.
